c
Questions? Call Us: 561.533.5500

B20B Connecting Rods

NOW IN STOCK..... Our popular Race Engineering Billet Rod series is now available for Honda LS style engines. Features fully machined 4340 alloy steel with ARP 2000-3/8" bolts installed. Features include reinforcement pads around the bolt holes for added strength. Wide footprint mating surfaces at the parting line (where the rod comes apart for assembly) helps prevent big-end distortion under high RPM loads. Click here for more information. A great rod at a great price....You Deserve Billets !
CROWER BILLET ROD: HONDA B18A/B18B/B20B

MFG PN: B93728B-1

The strongest yet lightest rods available. While other manufacturers are cutting corners, Crower incorporates only the finest aircraft quality steel.  Every contour is designed to enhance overall strength and reliability at high engine rpm. Crower connecting rods incorporate an I-beam design that eliminates pockets of excess material and delivers exceptional longitudinal and horizontal strength. The cap screw design assures true roundness and a positive bearing seat under severe load factors, in which eliminating rod bearing failure.

Protect your investment by insisting on only genuine Crower rods for your high performance needs.


(read more...)
Price: $277.76
In Stock & Ready to Ship
CARRILLO H BEAM ROD: HONDA B18A-B/B20 WMC BOLT

MFG PN: HN-B18>-65394H

Every Carrillo connecting rod is a symphony of precision: material specialist, forging precision, production craftsman, design engineers and engine specialists.

Carrillo rods are under the control of a rigorous Quality Assurance system. Each Carrillo rod is subjected to a variety of inline quality checks to ensure dimensions and meet stringent tolerance requirements. Carrillo employs a variety of testing equipment to accurately assess these tolerances, including a CMM, Air and Height-Gages and a 2D measuring system to name just a few. The initial quality assurance starts with the selection of steel, followed by a strict forging and a heat treating process.

Every connecting rod leaves Carrillo's facility with a specification card. This card displays a part number, critical dimensions, weights, job number and bolt installation chart; all for ease of identification and tracking.

Carrillo Connecting Rods.....the best you can get !





(read more...)
Price: $1,001.68
In Stock & Ready to Ship
CARRILLO H BEAM ROD: HONDA B18A-B/B20 CARR BOLT

MFG PN: HN-B18>-65394S

Every Carrillo connecting rod is a symphony of precision: material specialist, forging precision, production craftsman, design engineers and engine specialists.

Carrillo rods are under the control of a rigorous Quality Assurance system. Each Carrillo rod is subjected to a variety of inline quality checks to ensure dimensions and meet stringent tolerance requirements. Carrillo employs a variety of testing equipment to accurately assess these tolerances, including a CMM, Air and Height-Gages and a 2D measuring system to name just a few. The initial quality assurance starts with the selection of steel, followed by a strict forging and a heat treating process.

Every connecting rod leaves Carrillo's facility with a specification card. This card displays a part number, critical dimensions, weights, job number and bolt installation chart; all for ease of identification and tracking.

Carrillo Connecting Rods.....the best you can get !





(read more...)
Price: $1,189.64
In Stock & Ready to Ship
EAGLE H-BEAM ROD: HONDA B18A/B18B/B20B

MFG PN: CRS5394A3D

All Eagle H-beam connecting rods are forged from certified 4340 chromoly steel. Eagle connecting rods are subjected to extensive material testing. Another important design feature is that all Eagle H-beam connecting rods are manufactured from a 2 piece forging. This is significant because it enhances the strength of the rod cap by orienting the "grain" of the metal with the direction of stress. The stress exerted on the connecting rod cap is perpendicular to the stress on the beam. Eagle H- Beam connecting rods are supplied with ARP 2000 Capscrews and most are bushed for full floating wrist pins (unless noted).





(read more...)
Price: $326.40
Currently out of stock. Call or email us for Availability
EAGLE H-BEAM ROD: HONDA B18A/B18B (1 SINGLE)

MFG PN: 5394A3D-1

All Eagle H-beam connecting rods are forged from certified 4340 chromoly steel. Eagle connecting rods are subjected to extensive material testing. Another important design feature is that all Eagle H-beam connecting rods are manufactured from a 2 piece forging. This is significant because it enhances the strength of the rod cap by orienting the "grain" of the metal with the direction of stress. The stress exerted on the connecting rod cap is perpendicular to the stress on the beam. Eagle H- Beam connecting rods are supplied with ARP 2000 Capscrews and most are bushed for full floating wrist pins (unless noted).


(read more...)
Price: $118.61
In Stock & Ready to Ship
EAGLE H-BEAM ROD: HONDA B18A/LONG ROD

MFG PN: CRS5531A3D

All Eagle H-beam connecting rods are forged from certified 4340 chromoly steel. Eagle connecting rods are subjected to extensive material testing. Another important design feature is that all Eagle H-beam connecting rods are manufactured from a 2 piece forging. This is significant because it enhances the strength of the rod cap by orienting the "grain" of the metal with the direction of stress. The stress exerted on the connecting rod cap is perpendicular to the stress on the beam. Eagle H- Beam connecting rods are supplied with ARP 2000 Capscrews and most are bushed for full floating wrist pins (unless noted).





(read more...)
Price: $326.40
In Stock & Ready to Ship
EAGLE H-BEAM ROD: HONDA B18A/LONG-SINGLE

MFG PN: CRS5531A3D-1

All Eagle H-beam connecting rods are forged from certified 4340 chromoly steel. Eagle connecting rods are subjected to extensive material testing. Another important design feature is that all Eagle H-beam connecting rods are manufactured from a 2 piece forging. This is significant because it enhances the strength of the rod cap by orienting the "grain" of the metal with the direction of stress. The stress exerted on the connecting rod cap is perpendicular to the stress on the beam. Eagle H- Beam connecting rods are supplied with ARP 2000 Capscrews and most are bushed for full floating wrist pins (unless noted).


(read more...)
Price: $118.61
Currently out of stock. Call or email us for Availability
EAGLE H-BEAM ROD: ACURA 5.862" x .708" PIN

MFG PN: CRS5862A3D

All Eagle H-beam connecting rods are forged from certified 4340 chromoly steel. Eagle connecting rods are subjected to extensive material testing. Another important design feature is that all Eagle H-beam connecting rods are manufactured from a 2 piece forging. This is significant because it enhances the strength of the rod cap by orienting the "grain" of the metal with the direction of stress. The stress exerted on the connecting rod cap is perpendicular to the stress on the beam. Eagle H- Beam connecting rods are supplied with ARP 2000 Capscrews and most are bushed for full floating wrist pins (unless noted).





(read more...)
Price: $385.33
Currently out of stock. Call or email us for Availability
EAGLE H-BEAM ROD: HONDA B18A/B 5.967"

MFG PN: CRS5967A3D-1

All Eagle H-beam connecting rods are forged from certified 4340 chromoly steel. Eagle connecting rods are subjected to extensive material testing. Another important design feature is that all Eagle H-beam connecting rods are manufactured from a 2 piece forging. This is significant because it enhances the strength of the rod cap by orienting the "grain" of the metal with the direction of stress. The stress exerted on the connecting rod cap is perpendicular to the stress on the beam. Eagle H- Beam connecting rods are supplied with ARP 2000 Capscrews and most are bushed for full floating wrist pins (unless noted).


(read more...)
Price: $118.61
Currently out of stock. Call or email us for Availability
EAGLE H-BEAM ROD: HONDA F20C

MFG PN: CRS6023A3D

All Eagle H-beam connecting rods are forged from certified 4340 chromoly steel. Eagle connecting rods are subjected to extensive material testing. Another important design feature is that all Eagle H-beam connecting rods are manufactured from a 2 piece forging. This is significant because it enhances the strength of the rod cap by orienting the "grain" of the metal with the direction of stress. The stress exerted on the connecting rod cap is perpendicular to the stress on the beam. Eagle H- Beam connecting rods are supplied with ARP 2000 Capscrews and most are bushed for full floating wrist pins (unless noted).


(read more...)
Price: $385.33
Currently out of stock. Call or email us for Availability
EAGLE H-BEAM ROD: ACURA B18A/B18B +625

MFG PN: CRS5394AXD

All Eagle H-beam connecting rods are forged from certified 4340 chromoly steel. Eagle connecting rods are subjected to extensive material testing. Another important design feature is that all Eagle H-beam connecting rods are manufactured from a 2 piece forging. This is significant because it enhances the strength of the rod cap by orienting the "grain" of the metal with the direction of stress. The stress exerted on the connecting rod cap is perpendicular to the stress on the beam. Eagle H- Beam connecting rods are supplied with ARP 2000 Capscrews and most are bushed for full floating wrist pins (unless noted).





(read more...)
Price: $677.45
Currently out of stock. Call or email us for Availability
EAGLE H-BEAM ROD: LONG ROD ACURA 5.967"

MFG PN: CRS5967A3D

All Eagle H-beam connecting rods are forged from certified 4340 chromoly steel. Eagle connecting rods are subjected to extensive material testing. Another important design feature is that all Eagle H-beam connecting rods are manufactured from a 2 piece forging. This is significant because it enhances the strength of the rod cap by orienting the "grain" of the metal with the direction of stress. The stress exerted on the connecting rod cap is perpendicular to the stress on the beam. Eagle H- Beam connecting rods are supplied with ARP 2000 Capscrews and most are bushed for full floating wrist pins (unless noted).





(read more...)
Price: $385.33
In Stock & Ready to Ship
MANLEY TURBO-TUFF ROD: HONDA B18A/B-B20B

MFG PN: 14412-4


Manley Turbo-Tuff Pro Series "I" Beam connecting rods are forged from aircraft quality 4340 vacuum degassed material. Each rod is fully machined in the Manley Lakewood, NJ factory to the highest standards. Our signature "Turbo Tuff" design combines the appropriate weight and rugged strength for ultimate horsepower applications. Each rod is shot peened after machining and magnafluxed. Bores are round and without taper. Bend and twist is tightly controlled. Fasteners are 3/8" APR 2000 cap screws

Manley "H" Beam connecting rods are manufactured from 4340 forgings to the same exacting standards developed and approved by our original equipment customers. There is a vast difference in quality between a Manley "H" Beam and the "other" inexpensive H-Beams on the market. Weight matched to +/- 1.5 grams. Perfectly round big and small ends. Bend and twist is tightly controlled. Cap fasteners are 3/8" ARP 2000 for the "H" Beam and 3/8" ARP Custom Age 625+ for the H-Plus.





(read more...)
Price: $798.91
Currently out of stock. Call or email us for Availability
SCAT H-BEAM ROD: HONDA B18A/B B20B
Price: $105.45
Currently out of stock. Call or email us for Availability
EAGLE H-BEAM ROD: HONDA S2000 F22C

MFG PN: CRS5893A3D

All Eagle H-beam connecting rods are forged from certified 4340 chromoly steel. Eagle connecting rods are subjected to extensive material testing. Another important design feature is that all Eagle H-beam connecting rods are manufactured from a 2 piece forging. This is significant because it enhances the strength of the rod cap by orienting the "grain" of the metal with the direction of stress. The stress exerted on the connecting rod cap is perpendicular to the stress on the beam. Eagle H- Beam connecting rods are supplied with ARP 2000 Capscrews and most are bushed for full floating wrist pins (unless noted).


(read more...)
Price: $385.33
In Stock & Ready to Ship
RACE ENGINEERING: HONDA B18A/B18B/B20B I-BEAM BILLET ROD
Price: $124.00
In Stock & Ready to Ship
Loading...